| Portholes & PortVisors™ ~ Measuring, Models, and Sizes |
∙ What shape are your portholes: rectangular (R), rounded end (RE), round (RO), or football (FB) ?
∙ On the outside of the cabin, measure the trim ring's outside dimensions — width and height
∙ On the outside of the cabin, measure the trim ring's outside dimensions — width and height
 | |  | |  | |  | |  |
 | |  | |  | |  |
How to find the right size PortVisor™
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PortVisor™ Dimensions and Models |
| Home | Store | About Us | Ordering FAQs | Product FAQs | Porthole Sizes | Flotilla Photos | See Worthy Links | Contact Us |
1 Measure your portholes
2 Match your porthole width and shape to the PortVisor™ chart below
3 If you know your portlight manufacturer/size, check the Store page
∙ Your port width must be equal to or less than the PortVisor™ width
∙ PortVisors™ must cover at least 1/3 of the porthole's height to be effective
∙ Greater coverage is required for cabin sides with more slope
∙ PortVisors™ must cover at least 1/3 of the porthole's height to be effective
∙ Greater coverage is required for cabin sides with more slope
R = Rectangular, RE = Rounded End, RO = Round, FB = Football
∙ Corresponding portholes from many manufacturers are listed for each PortVisor™ model
∙ PortVisors™ are also listed by the type of boat they fit, as compiled from customer info
∙ PortVisors™ are also listed by the type of boat they fit, as compiled from customer info